TSC 6 Self-clinching Studs
TSC 6 SELF-CLINCHING STUDS
INSTALL THE CLINCHING PART - TSC6
TORQUE TO TURN TESTING - TSC6
PUSH-OUT TESTING - TSC6
INSTALLATION ANIMATION
ADVANTAGES OF CLINCHINGPARTS :
STEEL, STAINLESS STEEL
ADVANTAGES OF CLINCHINGPARTS :
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.
STUDS：
EXTERNALLY THREADED FASTENERS WHICH ARE USED WHERE THE ATTACHMENT MUST BE POSITIONED BEFORE BEING FASTENED.
OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST
Please scroll left and right for table browsing.
TSC 6- DIMENSIONS & SPECIFICATIONS
(MM)
| THREAD SIZE | P/N. | L LENGTH ±0.40 | D ±0.40 | +0.08 -0.00 | MAX. REC. NUT TIGHT. TORQUE N.m | MIN | MIN | ||||||||||||
| M2.5X0.45 | 2545 | 6 | 8 | 10 | 12 | 15 | 18 | 4.1 | 2.5 | 0.40 | 5.4 | 1.0 | |||||||
| M3X0.5 | 350 | 6 | 8 | 10 | 12 | 15 | 18 | 20 | 22 | 25 | 4.6 | 3.2 | 0.72 | 5.6 | 1.0 | ||||
| M3.5X0.6 | 356 | 6 | 8 | 10 | 12 | 15 | 18 | 20 | 22 | 25 | 28 | 30 | 5.3 | 3.5 | 1.10 | 6.4 | 1.0 | ||
| M4X0.7 | 470 | 6 | 8 | 10 | 12 | 15 | 18 | 20 | 22 | 25 | 28 | 30 | 35 | 38 | 5.9 | 4.0 | 1.60 | 7.2 | 1.0 |
| M5X0.8 | 580 | 8 | 10 | 12 | 15 | 18 | 20 | 22 | 25 | 28 | 30 | 35 | 38 | 6.5 | 5.0 | 3.40 | 7.2 | 1.0 | |
| M6X1.0 | 610 | 10 | 12 | 15 | 18 | 20 | 22 | 25 | 28 | 30 | 35 | 38 | 8.2 | 6.0 | 5.70 | 7.9 | 1.6 | ||
| M8X1.25 | 8125 | 12 | 15 | 18 | 20 | 22 | 25 | 28 | 30 | 35 | 38 | 9.6 | 8.0 | 14.00 | 9.6 | 2.4 | |||
Please scroll left and right for table browsing.
TSC 6 - DIMENSIONS & SPECIFICATIONS
( INCH )
| THREAD SIZE | P/N. | L LENGTH ±0.015 | D ± 0.015 | +0.003 -0.000 | MAX. REC. NUT TIGHT. TORQUE IN.-LBS | MIN | MIN | |||||||||
| #2-56 | 256 | 0.250 | 0.3125 | 0.375 | 0.500 | 0.625 | 0.750 | 0.144 | 0.085 | 2.5 | 0.187 | 0.040 | ||||
| #4-40 | 440 | 0.250 | 0.3125 | 0.375 | 0.500 | 0.625 | 0.750 | 0.875 | 1.00 | 0.176 | 0.111 | 5 | 0.219 | 0.040 | ||
| #6-32 | 632 | 0.250 | 0.3125 | 0.375 | 0.500 | 0.625 | 0.750 | 0.875 | 1.00 | 1.25 | 1.50 | 0.206 | 0.137 | 10 | 0.250 | 0.040 |
| #8-32 | 832 | 0.250 | 0.3125 | 0.375 | 0.500 | 0.625 | 0.750 | 0.875 | 1.00 | 1.25 | 1.50 | 0.237 | 0.163 | 15 | 0.281 | 0.040 |