Self Tapping Threaded Insert Slotted

STEEL, STAINLESS STEEL 303 (A1), STAINLESS STEEL 316 (A4 18-10), pASS C3604

SURFACE FINSIH AVAILABLE:

CR3 WHITEYELLOW ZINC PLATED

CHARACTERISTICS:

1.EASY TO INSTALLED.

2.DESIGNED TO REPLACE SPRING COIL.

3.PROVIDE STRONG THREADS FOR WEAK MATERIAL LIKE ALUMINUM OR PLASTIC.

4.ABLE TO INSTALL FOR VIpATING ENVIRONMENT.

APPICATIONS:

1.CAN BE APPLIED TO DIFFERENT MATERIAL SUCH AS PLASTIC, ALUMINUM, CAST IRON.

2.DESIGNED TO APPLY IN WEAK MATERIAL WHERE THREADS ARE FRENQUENTLY USED.

INSTALL BLIND RIVET NUT BY HAND TOOL

Please scroll left and right for table browsing.

INNER THREAD內螺紋  (H)		OUTSIDE THREAD外螺紋(D)		LENGTH  (L)	DRILLING DIAMETER IN CONSULTATION参考鑽孔徑			MINIMUM  DRILLING  DEPTH  最小鑽孔深度
THE METER SYSTEM-A	THE METRIC SYSTEM	EXTERNAL  DIAMETER	PH		PLASTIC  塑膠	ALUMINUM  鋁合金	CAST IRON鑄鐵
M2.5	#2	4.5	0.5	6	4.0 ~ 4.1	4.1 ~ 4.2	4.2 ~ 4.3	8
M3	#4	5	0.5	6	4.5 ~ 4.6	4.6 ~ 4.7	4.7 ~ 4.8	8
M3.5	#6	6	0.75	8	5.3 ~ 5.4	5.5 ~ 5.6	5.6 ~ 5.7	10
M4	#8	6.5	0.75	8	5.8 ~ 5.9	6.0 ~ 6.1	6.1 ~ 6.2	10
M5	#10	8	1	10	7.1 ~ 7.2	7.3 ~ 7.5	7.5 ~ 7.6	13
M6 (a)	#12	9	1	12	8.1 ~ 8.2	8.3 ~ 8.5	8.5 ~ 8.6	15
M6	#1/4"	10	1.5	14	9.0 ~ 9.2	9.2 ~ 9.3	9.3 ~ 9.4	17
M8	#5/16"	12	1.5	15	10.6 ~ 10.8	11.0 ~ 11.2	11.2 ~ 11.4	18
M10	#3/8"	14	1.5	18	12.6 ~ 12.8	13.0 ~ 13.3	13.2 ~ 13.4	22
M12	#7/16"	16	1.5	22	14.6 ~ 14.8	15.0 ~ 15.3	15.2 ~ 15.4	26
M14	#1/2"	18	1.5	24	16.6 ~ 16.8	17.0 ~ 17.3	17.2 ~ 17.5	28
M16	#5/8"	20	1.5	22	18.6 ~ 18.8	19.0 ~ 19.3	19.2 ~ 19.5	27
M18		22	1.5	24	20.6 ~ 20.8	21.0 ~ 21.3	21.2 ~ 21.5	29
M20		26	1.5	27	24.6 ~ 24.8	25.0 ~ 25.3	25.2 ~ 25.5	32
M22	#3/4"	26	1.5	30	24.6 ~ 24.8	25.0 ~ 25.3	25.2 ~ 25.5	36
M24	#7/8"	30	1.5	30	28.6 ~ 28.8	29.0 ~ 29.3	29.2 ~ 29.5	36
M27		34	1.5	30	32.6 ~ 32.8	33.0 ~ 33.3	33.2 ~ 33.5	36
M30		36	1.5	40	34.6 ~ 34.8	35.0 ~ 35.3	35.2 ~ 35.5	46