1/4 Speed Pin Rivet / Drive Pin Rivet

SPEED PIN RIVET / DRIVE PIN RIVET

MATERIAL AVAILABLE FOR SPEED PIN RIVET (DRIVE PIN RIVET):

BODY: ALUMINUM 2117 / STAINLESS STEEL 302 (INOX A2/18-8) / STEEL 1006

PIN: ALUMINUM 2024 / STAINLESS STEEL 304 (INOX A2/18-8) / STEEL 1022

FINISH SURFACE AVAILABLE FOR SPEED PIN RIVET (DRIVE PIN RIVET):

PLATING: CR3 WHITE ZINC PLATED/ CR3 YELLOW ZINC PLATED/ CR3 BLACK ZINC PLATED/ ANODIZED/CLEAN

ADVANTAGES OF SPEED PIN RIVET (DRIVE PIN RIVET):

1.SPEED PIN RIVET IS FAST AND EASY TO INSTALL.

2.NO SPECIAL INSTALLATION TOOL IS REQUIRED FOR SPEED PIN RIVET, JUST A HAMMER WILL DO.

3.VARIOUS MATERIALS ARE AVAILABLE FOR SPEED PIN RIVET.

4.VARIOUS HEAD STYLES ARE AVAILABLE FOR SPEED PIN RIVET.

5.SPEED PIN RIVET WILL NOT DAMAGE THE APPLICATION SURFACE

6.SPEED PIN RIVET CAN BE RUST RESISTANT.

7.SPEED PIN RIVET CAN BE APPLIED TO WIDE THICKNESS.

8.THE APPEARANCE LOOKS GOOD AFTER INSTALLATION.

OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

Please scroll left and right for table browsing.

1/4" DIAMETER	PART NO.		LENGTH (L)				GRIP RANGE (G)
		INCH	MM	NOM.		MIN.		MAX.
		INCH	MM	INCH	MM	INCH	MM	INCH	MM
UNIVERSAL HEAD	TSP6.4S-1	0.25	6.35	0.094	2.388	0.047	1.194	0.141	3.581
	TSP6.4S-2	0.281	7.137	0.125	3.175	0.078	1.981	0.172	4.369
	TSP6.4S-3	0.344	8.738	0.188	4.775	0.141	3.581	0.235	5.969
	TSP6.4S-4	0.406	10.312	0.25	6.35	0.203	5.156	0.297	7.544
	TSP6.4S-5	0.469	11.913	0.313	7.95	0.266	6.756	0.36	9.144
	TSP6.4S-6	0.531	13.487	0.375	9.525	0.328	8.331	0.422	10.719
	TSP6.4S-7	0.594	15.088	0.438	11.125	0.391	9.931	0.485	12.319
	TSP6.4S-8	0.656	16.662	0.5	12.7	0.453	11.506	0.547	13.894
	TSP6.4S-9	0.719	18.263	0.563	14.3	0.516	13.106	0.61	15.494
	TSP6.4S-10	0.781	19.837	0.625	15.875	0.578	14.681	0.672	17.069
	TSP6.4S-11	0.844	21.438	0.688	17.475	0.641	16.281	0.735	18.669
	TSP6.4S-12	0.906	23.012	0.75	19.05	0.733	17.856	0.797	20.244
	TSP6.4S-13	0.969	24.613	0.813	20.65	0.766	19.456	0.86	21.844
	TSP6.4S-14	1.031	26.187	0.875	22.225	0.828	21.031	0.922	23.419
	TSP6.4S-15	1.094	27.788	0.938	23.825	0.891	22.631	0.985	25.019
	TSP6.4S-16	1.156	29.362	1	25.4	0.953	24.206	1.047	26.594
	TSP6.4S-17	1.281	32.537	1.125	28.575	1.078	27381	1.172	29.769
	TSP6.4S-18	1.531	38.887	1.375	34.925	1.328	33.731	1.422	36.119
BRAZIER HEAD	TSP6.4B-1	0.25	6.35	0.094	2.388	0.047	1.194	0.141	3.581
	TSP6.4B-2	0.281	7.137	0.125	3.175	0.078	1.981	0.172	4.369
	TSP6.4B-3	0344	8.738	0.188	4.755	0.141	3.581	0.235	5.969
	TSP6.4B-4	0.406	10.312	0.25	6.35	0.203	5.156	0.297	7.544
	TSP6.4B-5	0.469	11.913	0.313	7.95	0.266	6.756	0.36	9.144
	TSP6.4B-6	0.531	13.487	0.375	9.525	0.328	8331	0.422	10.719
	TSP6.4B-7	0.594	15.088	0.438	11.125	0.391	9.931	0.485	12.319
	TSP6.4B-8	0.656	16.662	0.5	12.7	0.453	11.506	0.547	13.894
	TSP6.4B-9	0.719	18.263	0.563	14.3	0.516	13.106	0.61	15.949
	TSP6.4B-10	0.781	19.837	0.625	15.875	0.578	14681	0.672	17.069
	TSP6.4B-11	0.844	21.438	0.688	17.475	0.641	16.281	0.735	18.669
	TSP6.4B-12	0.906	23.012	0.75	19.05	0.703	17.856	0.797	20.244
	TSP6.4B-13	0.969	24.613	0.813	20.65	0.766	19.456	0.86	21.844
	TSP6.4B-14	1.031	26.187	0.875	22.225	0.828	21.031	0.922	23.419
	TSP6.4B-15	1.094	27.788	0.938	23.825	0.891	22.631	0.985	25.019
COUNTERSUNK HEAD * WITH CHAMFER	TSP6.4C-1	0.344	8.738	0.188	4.775	0.141	3.581	0.235	5.969
	TSP6.4C-2	0.406	10.312	0.25	6.35	0.203	5.156	0.297	7.544
	TSP6.4C-3	0.469	11.913	0.313	7.95	0.266	6.756	0.36	9.144
	TSP6.4C-4	0.531	13.487	0.375	9.525	0.328	8.331	0.422	10.719
	TSP6.4C-5	0.594	15.088	0.438	11.125	0.391	9.931	0.485	12.319
	TSP6.4C-6	0.656	16.662	0.5	12.7	0.453	11.506	0.547	13.894
	TSP6.4C-7	0.719	18.263	0.563	14.3	0.516	13.106	0.61	15.494
	TSP6.4C-8	0.781	19.837	0.625	15.875	0.578	14.681	0.672	17.069
	TSP6.4C-9	0.844	21.438	0.688	17.475	0.641	16281	0.735	18.669
	TSP6.4C-10	0.906	23.012	0.75	19.05	0.703	17.856	0.797	20.244
	TSP6.4C-11	0.969	24.613	0.813	20.65	0.766	19.456	0.86	21.844
	TSP6.4C-12	1.031	26.187	0.875	22.225	0.828	21.031	0.922	23.419
	TSP6.4C-13	1.094	27.788	0.938	23.825	0.891	22.631	0.985	25.019
	TSP6.4C-14	1.156	29.362	1	25.4	0.953	24.206	1.047	26.594